Live Help
24x7x365 Technical Support Phone,Email or Live chat

Reset Modem to Default

You may want to reset your modem to the factory default settings for one or more of the following reasons:

Before you begin, please make sure you have identified your modem by following the instructions on the "Identify My Modem" page.

Follow the instructions that apply to your modem type:

Instructions for Zoom X4 (1-port)

There are two methods you can use to reset your Zoom X4 to factory default: hardware and software. The hardware method is easier and quicker, so you should try that first.

Hardware Method

There is a little RESET pinhole on the back of your Zoom X4 modem. Using a paper clip (or other similar pointed object), push in the RESET button for a full 5 seconds. This should cause the light pattern to change on the the front of your modem. When the lights settle back into their usual pattern, the reset is complete. This may take 1-2 minutes. Do not turn your modem off during this time. If the hardware reset doesn't work, you can try again.

Your modem is now reset to the default factory settings. You can now follow the "Reconfigure Modem" instructions to reconfigure your modem in router mode (for most people), or you can follow the instructions to "Configure Bridge Mode" (for unusual situations) according to your requirements.

Software Method

These instructions are slightly different depending on whether you are connecting to the Zoom X4 using Ethernet or USB. If you are using USB, please make sure you have installed the USB drivers on your computer first by following the "Installing USB Drivers" instuctions. Also, make sure your modem is hooked up properly by following the instructions for "Connecting Cables".

Open a web browser, such as Internet Explorer.

If you are using Ethernet, in the Address bar type "10.0.0.2" and hit the ENTER key on your keyboard.

Or, if you are using USB, in the Address bar type "10.0.0.3" and hit the ENTER key on your keyboard.

The following window should pop up. (The window will look slightly different if you are using USB.) You may have to wait a little while. Type "admin" in the "User Name" box and type "zoomadsl" in the password box and click on the "OK" button.

You should see the Basic Setup screen:

Click on "Advanced Setup".

Scroll down to the bottom to the "Administration" section. Click on the "Reboot" button.

You should now be on the "Reboot" screen:

For "Reboot Mode" choose "Reboot From Default Configuration":

Click on the "Reboot" button:

You should see the following screen. It make take 2 minutes for the Zoom X4 to reboot. Please just be patient and do not turn the modem off. When the modem is done, you should be back at the "Basic Setup" screen. If you are still waiting after 3 minutes, you can try refreshing the page.

Your modem is now reset to the default factory settings. You can now follow the "Reconfigure Modem" instructions to reconfigure your modem in router mode (for most people), or you can follow the instructions to "Configure Bridge Mode" (for unusual situations) according to your requirements.

Instructions for Zoom X5 (4-port)

There are two methods you can use to reset your Zoom X5 to factory default: hardware and software. The hardware method is easier and quicker, so you should try that first.

Hardware Method

There is a little RESET pinhole on the back of your Zoom X5 modem. Using a paper clip (or other similar pointed object), push in the RESET button for a full 5 seconds. This should cause the light pattern to change on the the front of your modem. When the lights settle back into their usual pattern, the reset is complete. This may take 1-2 minutes. Do not turn your modem off during this time. If the hardware reset doesn't work, you can try again.

Your modem is now reset to the default factory settings. You can now follow the "Reconfigure Modem" instructions to reconfigure your modem in router mode (for most people), or you can follow the instructions to "Configure Bridge Mode" (for unusual situations) according to your requirements.

Software Method

These instructions are slightly different depending on whether you are connecting to the Zoom X5 using Ethernet or USB. If you are using USB, please make sure you have installed the USB drivers on your computer first by following the "Installing USB Drivers" instuctions. Also, make sure your modem is hooked up properly by following the instructions for "Connecting Cables".

Open a web browser, such as Internet Explorer.

If you are using Ethernet, in the Address bar type "10.0.0.2" and hit the ENTER key on your keyboard.

Or, if you are using USB, in the Address bar type "10.0.0.3" and hit the ENTER key on your keyboard.

The following window should pop up. (The window will look slightly different if you are using USB.) You may have to wait a little while. Type "admin" in the "User Name" box and type "zoomadsl" in the password box and click on the "OK" button.

You should see the Basic Setup screen:

Click on "Advanced Setup".

Scroll down to the bottom to the "Administration" section. Click on the "Reboot" button.

You should now be on the "Reboot" screen:

For "Reboot Mode" choose "Reboot From Default Configuration":

Click on the "Reboot" button:

You should see the following screen. It make take 2 minutes for the Zoom X5 to reboot. Please just be patient and do not turn the modem off. When the modem is done, you should be back at the "Basic Setup" screen. If you are still waiting after 3 minutes, you can try refreshing the page.

Your modem is now reset to the default factory settings. You can now follow the "Reconfigure Modem" instructions to reconfigure your modem in router mode (for most people), or you can follow the instructions to "Configure Bridge Mode" (for unusual situations) according to your requirements.

Instructions for Zoom X6 (4-port + wireless)

There are two methods you can use to reset your Zoom X6 to factory default: hardware and software. The hardware method is easier and quicker, so you should try that first.

Hardware Method

There is a little RESET pinhole on the back of your Zoom X6 modem. Using a paper clip (or other similar pointed object), push in the RESET button for a full 5 seconds. This should cause the light pattern to change on the the front of your modem. When the lights settle back into their usual pattern, the reset is complete. This may take 1-2 minutes. Do not turn your modem off during this time. If the hardware reset doesn't work, you can try again.

Your modem is now reset to the default factory settings. You can now follow the "Reconfigure Modem" instructions to reconfigure your modem in router mode (for most people), or you can follow the instructions to "Configure Bridge Mode" (for unusual situations) according to your requirements.

Software Method

Please make sure your Zoom X6 is hooked up properly using Ethernet by following the instructions for "Connecting Cables".

Open a web browser, such as Internet Explorer. In the Address bar type "10.0.0.2" and hit the ENTER key on your keyboard.

The following window should pop up. Type "admin" in the "User Name" box and type "zoomadsl" in the password box and click on the "OK" button.

Click on "Advanced Setup".

Scroll down to the bottom to the "Administration" section. Click on the "Restore Factory Setting" button.

You should now be on the "Restore Factory Setting" screen. Make sure there is a checkmark next to "Check to Restore Factory Setting", then click on the "Reboot" button.

The following message should pop up. Click on the "OK" button.

It make take 2 minutes for the Zoom X6 to reboot. Please just be patient and do not turn the modem off. When the modem is done, you should be back at the "Basic Setup" screen. If you are still waiting after 3 minutes, you can try refreshing the page.

Your modem is now reset to the default factory settings. You can now follow the "Reconfigure Modem" instructions to reconfigure your modem in router mode (for most people), or you can follow the instructions to "Configure Bridge Mode" (for unusual situations) according to your requirements.

Instructions for SpeedStream 4200 (1-port)

Hardware Method

The hardware method of resetting your SpeedStream 4200 modem is quick, easy, and reliable. It is the recommended method for resetting your 4200.

There is a little RESET pinhole on the back of your SpeedStream 4200 modem. Using a paper clip (or other similar pointed object), push in the RESET button for a full 5 seconds, until the power light turns red. (Do not hold in the button for longer than 10 seconds, or the reset will be cancelled.) When the lights settle back into their usual pattern, the reset is complete. This may take 1-2 minutes. Do not turn your modem off during this time. If the hardware reset doesn't work, you can try again.

Your modem is now reset to the default factory settings. You can now follow the "Reconfigure Modem" instructions to reconfigure your modem in router mode (for most people), or you can follow the instructions to "Configure Bridge Mode" (for unusual situations) according to your requirements.

Instructions for SpeedStream 6520 (4-port + wireless)

Hardware Method

The hardware method of resetting your SpeedStream 6520 modem is quick, easy, and reliable. It is the recommended method for resetting your 6520.

There is a little RESET pinhole on the bottom of your SpeedStream 6520 modem. Using a paper clip (or other similar pointed object), push in the RESET button for a full 5 seconds, until the power light turns red. (Do not hold in the button for longer than 10 seconds, or the reset will be cancelled.) When the lights settle back into their usual pattern, the reset is complete. This may take 1-2 minutes. Do not turn your modem off during this time. If the hardware reset doesn't work, you can try again.

Your modem is now reset to the default factory settings. You can now follow the "Reconfigure Modem" instructions to reconfigure your modem in router mode (for most people), or you can follow the instructions to "Configure Bridge Mode" (for unusual situations) according to your requirements.

Instructions for Siemens Gigaset SE567 (4-port + wireless)

Hardware Method

The hardware method of resetting your Siemens Gigaset SE567 modem is quick, easy, and reliable. It is the recommended method for resetting your SE567.

There is a little RESET pinhole on the bottom of your Siemens Gigaset SE567 modem. (It does not actually say RESET next to the pinhole.) Using a paper clip (or other similar pointed object), push in the RESET button for a full 5 seconds, until the power light turns red. (Do not hold in the button for longer than 10 seconds, or the reset will be cancelled.) When the lights settle back into their usual pattern, the reset is complete. This may take 1-2 minutes. Do not turn your modem off during this time. If the hardware reset doesn't work, you can try again.

Your modem is now reset to the default factory settings. You can now follow the "Reconfigure Modem" instructions to reconfigure your modem in router mode (for most people), or you can follow the instructions to "Configure Bridge Mode" (for unusual situations) according to your requirements.